Evans- Iphepha leNsimbi elingenaStainless
- Ikhoyili yentsimbi engatyiwa
- Umtya weNsimbi eNtsimbi
- Umbhobho weStainless Steel
- Ibha yentsimbi engatyiwayo
- Ipleyiti yeCarbon Steel
- Icwecwe Lentsimbi yeCarbon /Ikhoyili /Umbhobho /Ibha
- I-Nickle Based Alloy Sheet /Coil /Pipe /Bar
- Ishiti leNsimbi eGalvanized / Coil
- Ikhoyili yephepha lobhedu /Ibha /umbhobho
- Iphepha leAluminiyam/Ikhoyili
ICold Drawn Inconel 825 Nickel Alloy Round Bar ixabiso ngeKg
Ingcaciso yeMveliso
Izinto eziphathekayo | IMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
Ubume | Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
IBanga | I-Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
Abanye: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 njl. | |
Ingxubevange : Ingxubevange 20/28/31; | |
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; | |
| Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / UDIN W. UNr. 2.4617, Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 / I-UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 | |
Haynes: Haynes 230/556/188; | |
Uthotho lwe-Inconel: | |
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20; | |
| Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nom. 2.4816 | |
I-Inkoloy: I-Incoloy 800/800H/800HT/825/925/926; | |
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 | |
I-Monel: I-Monel 400/K500/R405 | |
Nitronic: Nitronic 40/50/60; | |
Nimonic: Nimonic 75/80A/90/A263 ; | |
Inkcazo | ucingo: 0.01-10mm Uluhlu: 0.05 * 5.0-5.0 * 250mm IBar: φ4-50mm;Ubude 2000-5000mm Umbhobho: φ6-273mm;δ1-30mm; Ubude 1000-8000mm Iphepha: δ 0.8-36mm; Ububanzi 650-2000mm; Ubude 800-4500mm |
| Imveliso Iimpawu | 1.Ngokwenkqubo yokulungiselela inokwahlulwa ibe yi-deformation superalloys, ukuphosa ii-superalloys kunye ne-powder metallurgy superalloys. I-2.Ngokuhambelana nemodi yokuqinisa, kukho uhlobo oluqinileyo lokuqinisa isisombululo, imvula ukomeleza uhlobo, i-oxide dispersion ukomeleza uhlobo kunye nohlobo lokomeleza ifayibha, njl. |
Umgangatho | GB, AISI, ASTM, DIN, EN, SUS, UNS, njl |
Ukuhlolwa | ISO, SGS,BV njalo njalo. |
Isicelo | Amacandelo obushushu obuphezulu anje nge blades ze turbine, i-vanes yesikhokelo, iidiski ze turbine, uxinzelelo oluphezulu iidiski zecompressor, ukwenziwa koomatshini kunye namagumbi okutsha asetyenziswa xa kusenziwa iinqwelomoya, iinqwelomoya zasemanzini nezamashishini |
I-Nickel ecocekileyo
Ukuqamba (%) | Ni+Co | Nge | Mnu | C | Fe | Kwaye | S |
N2 | ≥99.98 | ≤0.001 | ≤0.002 | ≤0.005 | ≤0.007 | ≤0.003 | ≤0.001 |
N4 | ≥99.90 | ≤0.015 | ≤0.002 | ≤0.01 | ≤0.04 | ≤0.13 | ≤0.001 |
I-N5(NW2201 N02201) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.40 | ≤0.30 | ≤0.01 |
N6 | ≥99.50 | ≤0.10 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.005 |
N7(NW2200 N02200) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.15 | ≤0.40 | ≤0.30 | ≤0.01 |
N8 | ≥99.00 | ≤0.15 | ≤0.20 | ≤0.20 | ≤0.30 | ≤0.15 | ≤0.015 |
N9 | ≥98.63 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.4 | ≤0.35 | ≤0.005 |
DN | ≥99.35 | ≤0.06 | ≤0.05 | 0.02~0.10 | ≤0.10 | 0.02~0.10 | ≤0.005 |
Iipropati Zomzimba
Ukuxinana | Indawo yokunyibilika | I-Coefficient yokwandisa | Imodyuli yokuqina | Imodyuli ye-elasticity | Ukumelana nombane | |
Nge200 | 8.9g/cm3 | 1446°C | 13.3 µm/m °C (20-100°C) | 81kN/mm2 | 204kN/mm2 | 9.6μW• cm |
Ngo201 | 1446°C | 13.1µm/m °C (20-100°C) | 82kN/mm2 | 207kN/mm2 | 8.5μW• cm |
Uphawu
Isicelo
Uluhlu lweMveliso
Ulawulo lwemeko
Ukupakisha kunye nokuhanjiswa
