Evans- Lambaran Stainless Steel
- Stainless Steel Coil
- Jalur Stainless Steel
- Pipa Stainless Steel
- Bar Stainless Steel
- Plat Baja Karbon
- Karbon Steel Lambaran / Coil / Pipa / Bar
- Nikel Dumasar Alloy Lambaran / Coil / Pipa / Bar
- Galvanized Steel Lambaran / Coil
- Tambaga Lambaran Coil / Bar / Pipa
- Lambaran Aluminium / Coil
17-4ph Inconel 718 Steel Coil 18650 Tambaga Inco Nikel Chrome Palapis Alloy Harga
Panjelasan Produk
Bahan | Monel / Inconel / Hastelloy / Duplex Steel / PH Steel / Nikel alloy |
Wangun | Buleud, Forging, Ring, Coil, Flange, Disc, Foil, Bulat, Pita, Kotak, Bar, Pipa, Lembar |
Kelas | Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
Lain: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 jsb | |
Galunggung: Galunggung 20/28/31; | |
Hastelloy: Hastelloy B / -2 / B-3 / C22 / C-4 / S / C276 / C-2000 / G-35 / G-30 / X / N / g; | |
| Hastelloy B / UNS N10001, Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617, Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610, Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819, Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 | |
Haynes: Haynes 230/556/188; | |
runtuyan Inconel: | |
Inconel 600/601/602CA/617/625/713/718/738/X-750, Tukang Kayu 20; | |
| Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668, Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856, Inconel 725 / UNS N07725, Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669, Inconel 600 / UNS N06600 / DIN W. No. 2.4816 | |
Incoloy: Incoloy 800 / 800H / 800HT / 825/925/926; | |
GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 | |
Monel: Monel 400 / K500 / R405 | |
Nitronik: Nitronik 40/50/60; | |
Nimonic: Nimonic 75/80A/90/A263 ; | |
Spésifikasi | Kawat: 0.01-10mm Jalur: 0,05 * 5,0-5,0 * 250mm Bar: φ4-50mm; Panjangna 2000-5000mm Pipa: φ6-273mm;δ1-30mm;Panjang 1000-8000mm Lambaran: δ 0.8-36mm; Lebar 650-2000mm; Panjangna 800-4500mm |
| produk Ciri | 1.According kana prosés persiapan bisa dibagi kana superalloys deformasi, casting superalloys jeung bubuk metallurgy superalloys. 2.According kana modeu strengthening, aya solusi solid strengthening tipe, présipitasi tipe strengthening, tipe strengthening dispersi oksida jeung tipe strengthening serat, jsb. |
Standar | GB,AISI,ASTM,DIN,EN,SUS,UNS jsb |
Pamariksaan | ISO, SGS, BV jeung saterusna. |
Aplikasi | Komponén suhu luhur sapertos bilah turbin, baling-baling pituduh, piringan turbin, tekanan tinggi compressor disk, manufaktur mesin jeung kamar durukan dipaké dina pabrik aviation, angkatan laut jeung turbin gas industri |
Nikel murni
Komposisi (%) | Ni+Co | Jeung | Bungbulang | C | Fe | Jeung | S |
N2 | ≥99.98 | ≤0.001 | ≤0,002 | ≤0,005 | ≤0,007 | ≤0,003 | ≤0.001 |
N4 | ≥99.90 | ≤0,015 | ≤0,002 | ≤0.01 | ≤0.04 | ≤0.13 | ≤0.001 |
N5(NW2201 N02201) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.40 | ≤0.30 | ≤0.01 |
N6 | ≥99,50 | ≤0.10 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0,005 |
N7(NW2200 N02200) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.15 | ≤0.40 | ≤0.30 | ≤0.01 |
N8 | ≥99.00 | ≤0.15 | ≤0.20 | ≤0.20 | ≤0.30 | ≤0.15 | ≤0,015 |
N9 | ≥98.63 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.4 | ≤0.35 | ≤0,005 |
DN | ≥99.35 | ≤0.06 | ≤0.05 | 0.02~0.10 | ≤0.10 | 0.02~0.10 | ≤0,005 |
Pasipatan fisik
Kapadetan | Titik lebur | Koéfisién ékspansi | Modulus kaku | Modulus élastisitas | Résistivitas listrik | |
Dina 200 | 8,9 g/cm3 | 1446°C | 13,3 µm/m °C (20-100°C) | 81kN/mm2 | 204kN/mm2 | 9,6μW• cm |
Dina 201 | 1446°C | 13,1µm/m °C (20-100°C) | 82kN/mm2 | 207kN/mm2 | 8,5μW• cm |
Ciri
Inventory produk
Kontrol kualitas
Bungkusan & Pangiriman
