ASTM B167 B829 Inconel 600 601 STAINLESS Rod Seamless Bar
Produkt beschreiwung
Material | Monel / Inconel / Hastelloy / Duplex Stol / PH Stol / Néckel Legierung |
Form | Ronn, Schmieden, Ring, Coil, Flange, Disc, Folie, Kugelgestalt, Ribbon, Quadrat, Bar, Päif, Blat |
Grad | Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
Anerer: 253Ma, 254 SMo, 654 SMo, F50 (UNS S32100) F60, F61, F65, 1J22, N4, N6 etc | |
Alloy : Alloy 20/28/31; | |
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; | |
Hastelloy B / UNS N10001, Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2,4665 | |
Haynes: Haynes 230/556/188; | |
Inconel Serie: | |
Inconel 600/601/602CA/617/625/713/718/738/X-750,Schräiner 20; | |
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2,4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. No. 2.4816 | |
Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 | |
Monel: Monel 400/K500/R405 | |
Nitronic: Nitronic 40/50/60; | |
Nimonic: Nimonic 75/80A/90/A263 ; | |
Spezifizéierung | Drot: 0,01-10mm Sträif: 0,05 * 5,0-5,0 * 250mm Bar: φ4-50mm; Längt 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Längt 1000-8000mm Blat: δ 0,8-36 mm; Breet 650-2000 mm; Längt 800-4500 mm |
Produit Charakteristiken | 1.No der Virbereedung Prozess kann an Deformatioun superalloys ënnerdeelt ginn, Guss Superlegierungen a Pulvermetallurgie Superlegierungen. 2.According zu der Verstäerkung Modus, et sinn zolidd Léisung Verstäerkung Typ, Nidderschlag Verstäerkungstyp, Oxiddispersiounsverstäerkungstyp a Faserverstäerkungstyp, asw. |
Standard | GB, AISI, ASTM, DIN, EN, SUS, UNS, etc |
Inspektioun | ISO, SGS, BV an sou weider. |
Applikatioun | Héich Temperatur Komponente wéi Turbinblades, Führerschlaangen, Turbinscheiwen, Héichdrock Kompressor Scheiwen, Maschinn Fabrikatioun a Verbrennungskammer, déi an der Fabrikatioun vu Loftfaart, Marine an Industriegasturbinen benotzt ginn |
Pure Néckel
Zesummesetzung (%) | Ni+Co | Mat | Mn | C | Fe | An | S |
N2 | ≥99,98 | ≤0,001 | ≤0,002 | ≤0,005 | ≤0,007 | ≤0,003 | ≤0,001 |
N4 | ≥99,90 | ≤0,015 | ≤0,002 | ≤0,01 | ≤0,04 | ≤0,13 | ≤0,001 |
N5(NW2201 N02201) | ≥99,00 | ≤0,25 | ≤0,35 | ≤0,02 | ≤0,40 | ≤0,30 | ≤0,01 |
N6 | ≥99,50 | ≤0,10 | ≤0,05 | ≤0,10 | ≤0,10 | ≤0,10 | ≤0,005 |
N7(NW2200 N02200) | ≥99,00 | ≤0,25 | ≤0,35 | ≤0,15 | ≤0,40 | ≤0,30 | ≤0,01 |
N8 | ≥99,00 | ≤0,15 | ≤0,20 | ≤0,20 | ≤0,30 | ≤0,15 | ≤0,015 |
N9 | ≥98,63 | ≤0,25 | ≤0,35 | ≤0,02 | ≤0,4 | ≤0,35 | ≤0,005 |
DN | ≥99,35 | ≤0,06 | ≤0,05 | 0.02~0.10 | ≤0,10 | 0.02~0.10 | ≤0,005 |
Kierperlech Eegeschafte
Dicht | Schmëlzpunkt | Expansiounskoeffizient | Steifheitsmodul | Elastizitéitsmodul | Elektresch Resistivitéit | |
Op 200 | 8,9 g/cm3 | 1446°C | 13,3 µm/m °C (20-100 °C) | 81 kN/mm2 | 204 kN/mm2 | 9,6 μW• cm |
Am Joer 201 | 1446°C | 13,1 µm/m °C (20-100 °C) | 82 kN/mm2 | 207 kN/mm2 | 8,5 μW• cm |