- Bileag stàilinn gun staoin
- Coil stàilinn gun staoin
- Stiall stàilinn gun staoin
- Pìoba stàilinn gun staoin
- Bàr stàilinn gun staoin
- Clàr stàilinn carbon
- Duilleag stàilinn carbon / coil / pìob / bàr
- Duilleag Alloy stèidhichte air Nickle / Coil / Pìob / Bàr
- Duilleag stàilinn ghalbhanaichte / coil
- Coil duilleag copair / bàr / pìob
- Duilleag alùmanum / coil
Pìoba stàilinn gun ròn BS1139 4mm
Tuairisgeul toraidh
Stuth | Monel / Inconel / Hastelloy / Stàilinn Duplex / PH Steel / Nickel Alloy |
Cruth | Cruinn, Cruthachadh, Cearcall, Coil, Flange, Diosc, Foil, Spherical, Ribbon, Ceàrnag, Bàr, Pìoba, Duilleag |
Ìre | Duplex: 2205 (UNS S31803 / S32205), 2507 (UNS S32750), UNS S32760 (Zeron 100), 2304,904L |
Eile: 253Ma, 254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc | |
Alloy: Alloy 20/28/31; | |
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/C276/C-2000/G-35/G-30/X/N/g; | |
Hastelloy B / UNS N10001, Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617, Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610, Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819, Hastelloy X / UNS N06002 / DIN W. Nr. 2. 4665 | |
Haynes: Haynes 230/556/188; | |
Sreath Inconel: | |
Inconel 600/601/602CA/617/625/713/718/738/X-750, Carpenter 20; | |
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2. 4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725, Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Chan eil. 2.4816 | |
Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 | |
Monel: Monel 400/K500/R405 | |
Nitronic: Nitronic 40/50/60; | |
Nimonic: Nimonic 75/80A/90/A263; | |
Sònrachadh | Uèir: 0.01-10mm Stiall: 0.05*5.0-5.0*250mm Bàr: φ4-50mm; Fad 2000-5000mm Pìoba: φ6-273mm; δ1-30mm; Fad 1000-8000mm Duilleag: δ 0.8-36mm; Leud 650-2000mm; Fad 800-4500mm |
Bathar Caractaran | 1.A rèir a 'phròiseas ullachaidh a roinn ann an superalloys deformation, tilgeadh superalloys agus superalloys meatailteachd pùdarrach. 2.According ris a 'mhodh neartachaidh, tha cruaidh fuasgladh neartachadh seòrsa, sileadh neartachadh seòrsa, oxide dispersion neartachadh seòrsa agus freumhag neartachadh seòrsa, etc. |
Inbhe | GB, AISI, ASTM, DIN, EN, SUS, UNS, msaa |
Sgrùdadh | ISO, SGS, BV agus mar sin air adhart. |
Iarrtas | Co-phàirtean aig teòthachd àrd leithid lannan roth-uidheam, vanes treòrachaidh, diosc roth-uidheam, bruthadh àrd diosgan compressor, saothrachadh innealan agus seòmraichean losgaidh a thathas a’ cleachdadh ann a bhith a’ dèanamh roth-uidheaman itealain, cabhlaich agus gas gnìomhachais |
Nickel fìor-ghlan
Sgrìobhadh (%) | Ni+Co | Le | Mn | c | Fe | Agus | S |
N2 | ≥99.98 | ≤0.001 | ≤0.002 | ≤0.005 | ≤0.007 | ≤0.003 | ≤0.001 |
N4 | ≥99.90 | ≤0.015 | ≤0.002 | ≤0.01 | ≤0.04 | ≤0.13 | ≤0.001 |
N5(NW 2201 N02201) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.40 | ≤0.30 | ≤0.01 |
N6 | ≥99.50 | ≤0.10 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.005 |
N7(NW2200 N02200) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.15 | ≤0.40 | ≤0.30 | ≤0.01 |
N8 | ≥99.00 | ≤0.15 | ≤0.20 | ≤0.20 | ≤0.30 | ≤0.15 | ≤0.015 |
N9 | ≥98.63 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.4 | ≤0.35 | ≤0.005 |
DN | ≥99.35 | ≤0.06 | ≤0.05 | 0.02~0.10 | ≤0.10 | 0.02~0.10 | ≤0.005 |
Feartan corporra
Dùmhlachd | Puing leaghaidh | Coefficient leudachaidh | Modulus cruadalachd | Modal elasticity | Frith-aghaidh dealain | |
Aig 200 | 8.9g/cm3 | 1446°C | 13.3 µm/m ° C (20-100 ° C) | 81kN/mm2 | 204kN/mm2 | 9.6 µW• cm |
Ann an 201 | 1446°C | 13.1µm/m ° C (20-100 ° C) | 82kN/mm2 | 207kN/mm2 | 8.5 µW• cm |