ASTM B167 B829 Inconel 600 601Stainless Rod Seamless Bar
produkt Omskriuwing
Materiaal | Monel / Inconel / Hastelloy / Duplex Steel / PH Steel / Nikkel Alloy |
Foarm | Rûn, Forging, Ring, Coil, Flens, Disc, Folie, Sferysk, Lint, Fjouwerkant, Bar, Pipe, Sheet |
Klasse | Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
Oaren: 253Ma, 254SMo, 654SMo, F50 (UNS S32100) F60, F61, F65, 1J22, N4, N6 ensfh | |
Alloy : Alloy 20/28/31; | |
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; | |
Hastelloy B / UNS N10001, Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 | |
Haynes: Haynes 230/556/188; | |
Inconel Searjes: | |
Inconel 600/601/602CA/617/625/713/718/738/X-750,Timmerman 20; | |
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. No. 2.4816 | |
Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 | |
Monel: Monel 400/K500/R405 | |
Nitronic: Nitronic 40/50/60; | |
Nimonic: Nimonic 75/80A/90/A263 ; | |
Spesifikaasje | Wire: 0.01-10mm Strip: 0.05 * 5.0-5.0 * 250mm Bar: φ4-50mm; Lengte 2000-5000mm Pipe: φ6-273mm;δ1-30mm; Lengte 1000-8000mm Blêd: δ 0.8-36mm; Breedte 650-2000mm; Lengte 800-4500mm |
Produkt Skaaimerken | 1.Neffens de tarieding proses kin wurde ferdield yn deformation superalloys, casting superalloys en poedermetallurgy superalloys. 2.According de fersterking modus, der binne fêste oplossing fersterkjen type, delslach fersterkjen type, okside dispersion fersterkjen type en fiber fersterkjen type, ensfh |
Standert | GB, AISI, ASTM, DIN, EN, SUS, UNS, ensfh |
Ynspeksje | ISO, SGS, BV ensafuorthinne. |
Oanfraach | Hege temperatuer komponinten lykas turbine blades, guide fanes, turbine skiven, hege druk compressor skiven, masine fabrikaazje en ferbaarningskeamers brûkt by de fabrikaazje fan loftfeart, marine en yndustriële gasturbines |
Pure nikkel
Gearstalling (%) | Ni+Co | Mei | Mn | C | Fe | En | S |
N2 | ≥99.98 | ≤0,001 | ≤0,002 | ≤0,005 | ≤0,007 | ≤0,003 | ≤0,001 |
N4 | ≥99,90 | ≤0,015 | ≤0,002 | ≤0.01 | ≤0,04 | ≤0.13 | ≤0,001 |
N5(NW2201 N02201) | ≥99.00 | ≤0,25 | ≤0,35 | ≤0,02 | ≤0,40 | ≤0,30 | ≤0.01 |
N6 | ≥99,50 | ≤0.10 | ≤0,05 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0,005 |
N7(NW2200 N02200) | ≥99.00 | ≤0,25 | ≤0,35 | ≤0,15 | ≤0,40 | ≤0,30 | ≤0.01 |
N8 | ≥99.00 | ≤0,15 | ≤0,20 | ≤0,20 | ≤0,30 | ≤0,15 | ≤0,015 |
N9 | ≥98.63 | ≤0,25 | ≤0,35 | ≤0,02 | ≤0.4 | ≤0,35 | ≤0,005 |
DN | ≥99,35 | ≤0,06 | ≤0,05 | 0.02~0.10 | ≤0.10 | 0.02~0.10 | ≤0,005 |
Fysike eigenskippen
Tichtheid | Smeltpunt | Koëffisjint fan útwreiding | Modulus fan rigidity | Modulus fan elastisiteit | Elektryske resistiviteit | |
Op 200 | 8.9g/cm3 | 1446°C | 13,3 µm/m °C (20-100 °C) | 81 kN/mm2 | 204 kN/mm2 | 9.6μW• sm |
Yn 201 | 1446°C | 13.1µm/m °C (20-100 °C) | 82 kN/mm2 | 207 kN/mm2 | 8.5μW• sm |