ASTM B127 Nickel Based Alloy Monel 400 Coil Strip Presyo EB0126
Deskripsyon sa Produkto
Materyal nga | Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nikel Alloy |
Porma | Round, Forging, Ring, Coil, Flange, Disc, Foil, Spherical, Ribbon, Square, Bar, Pipe, Sheet |
Grado | Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
Uban pa: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc | |
Alloy : Alloy 20/28/31; | |
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; | |
Hastelloy B / UNS N10001, Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617, Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610, Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 | |
Haynes: Haynes 230/556/188; | |
Serye sa Inconel: | |
Inconel 600/601/602CA/617/625/713/718/738/X-750,Panday 20; | |
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668, Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856, Inconel 725 / UNS N07725, Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669, Inconel 600 / UNS N06600 / DIN W. No. 2.4816 | |
Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 | |
Monel: Monel 400/K500/R405 | |
Nitronic: Nitronic 40/50/60; | |
Nimonic: Nimonic 75/80A/90/A263 ; | |
Espesipikasyon | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm; Gitas-on 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Gitas-on 1000-8000mm Palid: δ 0.8-36mm; Lapad 650-2000mm; Gitas-on 800-4500mm |
Produkto Mga kinaiya | 1. Sumala sa proseso sa pagpangandam mahimong bahinon ngadto sa deformation superalloys, casting superalloys ug powder metallurgy superalloys. 2. Sumala sa paagi sa pagpalig-on, adunay mga solid nga solusyon nga nagpalig-on sa matang, ulan matang sa pagpalig-on, matang sa pagpalig-on sa oxide dispersion ug matang sa pagpalig-on sa fiber, ug uban pa. |
Estandard | GB, AISI, ASTM, DIN, EN, SUS, UNS ug uban pa |
Inspeksyon | ISO, SGS, BV ug uban pa. |
Aplikasyon | Taas nga temperatura nga mga sangkap sama sa turbine blades, guide vanes, turbine disk, taas nga presyur compressor disks, paghimo sa makina ug mga combustion chamber nga gigamit sa paghimo sa aviation, naval ug industrial gas turbines |
Purong Nickel
Komposisyon (%) | Ni+Co | Uban sa | Mn | C | Si Fe | Ug | S |
N2 | ≥99.98 | ≤0.001 | ≤0.002 | ≤0.005 | ≤0.007 | ≤0.003 | ≤0.001 |
N4 | ≥99.90 | ≤0.015 | ≤0.002 | ≤0.01 | ≤0.04 | ≤0.13 | ≤0.001 |
N5(NW2201 N02201) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.40 | ≤0.30 | ≤0.01 |
N6 | ≥99.50 | ≤0.10 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.005 |
N7(NW2200 N02200) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.15 | ≤0.40 | ≤0.30 | ≤0.01 |
N8 | ≥99.00 | ≤0.15 | ≤0.20 | ≤0.20 | ≤0.30 | ≤0.15 | ≤0.015 |
N9 | ≥98.63 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.4 | ≤0.35 | ≤0.005 |
DN | ≥99.35 | ≤0.06 | ≤0.05 | 0.02~0.10 | ≤0.10 | 0.02~0.10 | ≤0.005 |
Pisikal nga mga kabtangan
Densidad | Natunaw nga punto | Coefficient sa pagpalapad | Modulus sa rigidity | Modulus sa elasticity | Ang resistensya sa elektrisidad | |
Sa 200 | 8.9g/cm3 | 1446°C | 13.3 µm/m °C (20-100°C) | 81kN/mm2 | 204kN/mm2 | 9.6μW• cm |
Sa 201 | 1446°C | 13.1µm/m °C (20-100°C) | 82kN/mm2 | 207kN/mm2 | 8.5μW• cm |